From the drawing to the cut list, without typing it twice
How a wardrobe drawn in SketchUp becomes parts, board layouts and bench drawings in CabinetOS.
Drawing a wardrobe and making one are two different jobs. The drawing shows the client what they're getting. The making needs every part: its size, its board, its edging, and how the parts fit on a 2440 × 1220 sheet with as little waste as possible.
For years those were two separate pieces of work, and the gap between them is where mistakes live. CabinetOS started there: a cut-list mistake in a spreadsheet cost me money on a job. So I built a tool where the cut list comes from the design itself, and the two can't disagree.
Design: units that size themselves
CabinetOS for SketchUp is an extension for drawing wardrobes and cabinets inside SketchUp with the same maths as CabinetOS. You place a unit and set its size. Every part is its own component, and the parts adjust with the unit: change the width and the top, the base and the shelves all follow.
Because each part is real, cutting tools that read SketchUp parts can work with the drawing too.
Make: the cut list from the design
CabinetOS, the Cabinet Operating System, takes the design and works out the rest:
- every part, with its size, listed for the cut
- the parts nested on 2440 × 1220 boards
- drawings to print and take to the bench
- a 3D link your client can open on their phone
On the CabinetOS demo job, 85 parts fit on 10 boards with 9% waste.
Why it matters on a real job
When the drawing and the cut list are the same thing, a change the client asks for on Thursday is in the cut list on Thursday. Nobody copies sizes from one screen to another, so nobody copies one wrong.
CabinetOS has a free plan, so you can try it on your next job before you decide anything. The extension comes with one free trial with the app.